Navigate to <https://app.bmis.nz/dashboard> All new buildings are set as 'Scheme not required' as default. To update this, go to building settings.

Click here to enable the building as a 'Relevant' building for fire evacuation.

If the building is relevant, but an evacuation scheme is not required, click as shown.

Then you are asked to upload the 'Notification that an evacuation scheme is not required' document.

 Notification that an evacuation scheme is not required *
Files Supported [application/pdf,application/msword]

If the building is relevant, and a Fire Evacuation scheme is required, complete the rest of the form.

assembly

Click here to upload the Emergency Evacuation Scheme Document.

 Emergency Evac Scheme
Files Supported [application/pdf,application/msword]

Click here to upload the Emergency Evacuation Scheme Application Document.

 Emergency Evac Scheme Application Form
Files Supported [application/pdf,application/msword]

Now to setup the next trial Evacuation date, click on the card and follow the steps outlined at <https://bmis.nz/support/fire/create-trial-evacuation/>

To Draw an Evacuation plan, Click "Evacuation Plans" and follow the steps at <https://bmis.nz/support/fire/fire-evacuation-plan/>

Bmis

Google

This guide provides essential step-by-step instructions for effectively setting up the BMIS Fire Evacuation Module, ensuring compliance with fire safety regulations. By following the outlined processes, users can set up relevant building settings, manage evacuation schemes, and schedule trial evacuations.