Mount the switch in a suitable location. Using the bolt for the clutch lever for example is quite common.

Insert the Map Switch cable to the chocolate block style connector on the top of the Power Commander and tighten using a small flat blade screwdriver. You can use input 1 or 2, but input 1 is set as default for the set up (this can be changed in Step 8)

Connect the Power Commander to your computer via the USB cable

Use the drop-down to select enable. You can switch the Input from 1 to 2 if you have connected the map switch to Input 2 on the Power Commander

Map Position 2 will have appeared in the Explorer section

Click "Send" to send changes to the Power Commander

To send a different Map to position 2, click "Open"

Find the map you want in the Windows File Explorer and double click to open it in the software

Dynojet

This guide provides step-by-step instructions for fitting and enabling a map switch on a PCV/6.

How to Fit & Enable Map Switch on a PCV/6