From the locations tab, choose the location you wish to edit product settings for, then click "Edit".

Select the product you wish to edit the settings for, in this case "Volumetric concrete"

Click the down arrow in the "Unit" field to select what unit of measurement to use for your product.

When you've found your preferred unit of measurement, click it to save it. In this case we're using "Cubic meter".

Click in to the "Truck Capacity" field to set the maximum capacity for your delivery method. 

Note: Capacity represents the maximum capacity of a single truck. 

Click in to the "Min Per Truck" field.

This field represents the minimum amount of product that can be sent out in a truck for an order. It does not represent the minimum quantity for an order, but instead the minimum threshold for an additional truck to be added to an order.

In this configuration, a single truck has a maximum capacity of 10 cubic metres, so an order will need to be at minimum 11 cubic metres for an additional truck to be added. 

Click in to the "Min Order" field to set the minimum quantity required for an order. 

With this configured to 2.5 cubic metres, a single one-truck order requires a minimum of 2.5 cubic metres. Orders lower than 2.5 cubic metres will not be permitted. 

Click in to the "Max Order" field.

Note: The "Max Order" field does not represent the maximum quantity that can be loaded in to a truck, it represents the maximum amount of trucks that can be assigned to an order. 

In this configuration, the maximum amount of product that can be ordered is 10 trucks x 10 cubic metres, for a total of 100 cubic metres of product. 

Click "Next" to finalize your product settings.

How to Initialiaze Product Category Settings