Heads Up! When using the Hudl Focus in Wirecast, please use an Ethernet connection for your internet. Using Wi-Fi can cause problems.

With Wirecast open, on the first Master Layer, click the "+" icon.

In the new window click "Network",
then "Web Stream",
then the "Add" Button.

In the URI box, type the "RTMP" address. There are two addresses to choose from, first is the basketball angle with the "tracking" camera named "tactical", and the second is the volleyball angle named "panoramic". 
These addresses can be found in the Hudl app, under "Settings" and "Broadcast with Hudl Focus".

Click the "Buffer" field and change from .25 seconds to 1 second.

Click the "Apply" button to save the changes. 

Sometimes it is necessary to hit the "Reconnect" button, this is clicked when the video feed is very grainy, or the video is tearing. It could take a few clicks of the "Reconnect" button to get the video feed to clear up. 

The will be a video delay when using the Hudl camera. You will need to delay the audio from the Hudl camera to sync it to the video. This part of the process is trial and error. Start at an audio delay of 1 second and tweak from there. If you are using a soundboard, you will need to delay the soundboard itself. 

Whatever audio source you choose, you will need to go to the device properties and enter the delay. 

That's it. You pulled the Hudl Focus camera into Wirecast. You should see an orange screen in the preview window saying you are connected to the Hudl Focus. 

Pulling the Hudl Focus Camera into Wirecast.