Enter the frame width and height, then Click "Apply"

If processing a triple track position or an OXXO, you will need to select the "free configuration" option.

Select the Required Interlock Type an Press OK.

It is not possible to process a Triple Track using a Slimline Interlock!

Select the required Frame Profile Connection type.

Select the required Colour from the drop down list.

You can search for the specific RAL code too.

Select the required "Foam" type. Without will achieve a 1.4 U-value, With will achieve a 1.3 U-value.

Select the Sash Profile or Click the "+" box to the left if a reinforcement is required. Repeat this step for all leaves.

Right click slightly above the frame to bring up a selection window.

Select "New" &gt; "Add-on Profile". This will automatically apply the Add-on Profile.

Right click slightly below the frame to bring up a selection window.

Click hereSelect "New" &gt; "Wall Connection".

Expand the "Centre" &gt; "Standard" Field. Select the Cill profile.

Select the Lock. Only 1 lock will be available to select, depending on Sash Height.

If using 71835 Handle, Select RX194. Otherwise, Select &lt;none&gt;

Orgadata

This guide provides detailed steps on how to configure a new position. It covers everything from entering position details to selecting accessories and finishes. If you need assistance with setting up a new position, this guide will walk you through the process.

S140 L&S LogiKal Processing Guide