Adding a 450 radio channel in Earthworks
Sitech Northeast
18 steps
47 seconds
Localhost
1
In the WEB INTERFACE app tap and input Login information **Username: admin** **Password: Sitech#1** then click Login.
2
Tap on the Network tab.
3
Tap on GNSS Correction Source.
4
Then you need to unlock the web interface. Tap on the padlock symbol in the lower right corner.
5
Tap Send Message to send an Unlock Request and the WEB INTERFACE will unlock. If it doesn't, please unplug the Trimble TD540 display and try again.
6
The Request Accepted message means the WEB INTERFACE is unlocked.
7
Tap Add button.
8
Make sure "SNRxxx" is selected.
9
Tap here.
10
Give the channel a Name. I usually put the frequency number.
11
Tap Name and type a name in the Name window.
12
Tap the Band selection and choose 450.
13
Tap Save.
14
Tap here.
15
This is an example of what the 450 MHz radio channel screen in Earthworks will look like.
16
After you have added the radio channel that you want you need to verify it is connected. Tap on Monitor tab.
17
Tap GNSS Details.
18
Scroll down and tap on GNSS Receiver Left - MS9xx. Notice the Integrity 3 minutes: number climbing and eventually get to 100%.
Adding a 450 radio channel in Earthworks
Sitech Northeast
18 steps
47 seconds
Localhost
1
In the WEB INTERFACE app tap and input Login information **Username: admin** **Password: Sitech#1** then click Login.
2
Tap on the Network tab.
3
Tap on GNSS Correction Source.
4
Then you need to unlock the web interface. Tap on the padlock symbol in the lower right corner.
5
Tap Send Message to send an Unlock Request and the WEB INTERFACE will unlock. If it doesn't, please unplug the Trimble TD540 display and try again.
6
The Request Accepted message means the WEB INTERFACE is unlocked.
7
Tap Add button.
8
Make sure "SNRxxx" is selected.
9
Tap here.
10
Give the channel a Name. I usually put the frequency number.
11
Tap Name and type a name in the Name window.
12
Tap the Band selection and choose 450.
13
Tap Save.
14
Tap here.
15
This is an example of what the 450 MHz radio channel screen in Earthworks will look like.
16
After you have added the radio channel that you want you need to verify it is connected. Tap on Monitor tab.
17
Tap GNSS Details.
18
Scroll down and tap on GNSS Receiver Left - MS9xx. Notice the Integrity 3 minutes: number climbing and eventually get to 100%.