Create a New Project in Siteworks
Sitech Northeast
14 steps
2 minutes
Before beginning, ensure you have all of your project files downloaded to a USB drive. These files cannot be in a zipped or compressed folder. You will need AT LEAST the following files: .**CSV Control Point File:** A minimum of 3 control points in a .csv file in P,N,E,Z,D (Name, Northing, Easting, Elevation, Description) format.
Create New Project in Siteworks
1
Tap on the plus button next to the "Project" drop box on the Siteworks "Open Project" screen.
2
Tap in the blank "Project" field to give your project a name. Do not use any special characters or punctuation.
3
Confirm your units are set correctly. These current selections are common in the Northeast, but always cross reference your plans and model data.
4
Select how you would like your stationing to appear on the screen. This is user preference.
5
Tap NEXT when finished.
6
Next, you need to upload your control point file. Tap the check box labeled Select control point file.
7
Tap the grey box labeled Tap to Select file.
8
By default, Siteworks will begin to look for files on the internal storage drive of the collector. You will need to select your USB drive where your project files are stored. Tap on the Drive drop box.
9
Select your USB drive, this could display a D:\\ or E:\\ depending on weather you have an SD card installed in your data collector.
10
Navigate to the folder in which your project files are stored. Tap on it once.
11
Tap "ACCEPT".
When looking for you control point or design files through Siteworks, Siteworks will only show you the respective file type it can import for the given project setup step. I.e. when uploading your control point file, Siteworks' file explorer will only show you files with a .csv extension.
12
Tap on your control point file.
13
Tap "ACCEPT".
14
Siteworks will now display the control point file name. Tap "FINISH".
Create a New Project in Siteworks
Sitech Northeast
14 steps
2 minutes
Before beginning, ensure you have all of your project files downloaded to a USB drive. These files cannot be in a zipped or compressed folder. You will need AT LEAST the following files: .**CSV Control Point File:** A minimum of 3 control points in a .csv file in P,N,E,Z,D (Name, Northing, Easting, Elevation, Description) format.
Create New Project in Siteworks
1
Tap on the plus button next to the "Project" drop box on the Siteworks "Open Project" screen.
2
Tap in the blank "Project" field to give your project a name. Do not use any special characters or punctuation.
3
Confirm your units are set correctly. These current selections are common in the Northeast, but always cross reference your plans and model data.
4
Select how you would like your stationing to appear on the screen. This is user preference.
5
Tap NEXT when finished.
6
Next, you need to upload your control point file. Tap the check box labeled Select control point file.
7
Tap the grey box labeled Tap to Select file.
8
By default, Siteworks will begin to look for files on the internal storage drive of the collector. You will need to select your USB drive where your project files are stored. Tap on the Drive drop box.
9
Select your USB drive, this could display a D:\\ or E:\\ depending on weather you have an SD card installed in your data collector.
10
Navigate to the folder in which your project files are stored. Tap on it once.
11
Tap "ACCEPT".
When looking for you control point or design files through Siteworks, Siteworks will only show you the respective file type it can import for the given project setup step. I.e. when uploading your control point file, Siteworks' file explorer will only show you files with a .csv extension.
12
Tap on your control point file.
13
Tap "ACCEPT".
14
Siteworks will now display the control point file name. Tap "FINISH".
