Exporting As Built Data From Siteworks

Siteworks version 1.75

Sitech Northeast
10 steps
30 seconds

Load into your Siteworks project and work order with the measured points you would like to export from the collector. Tap **Accept**.

Tap on the top left menu.

Plug a flash drive into your collector now.

Tap on **Data Management.**

Tap on **Export Measured Data.**

Select the file type you would like to export.

If you are looking to export just points to be imported into a CAD program, select .CSV file. If you are looking to export lines as well, you will need to export an additional .DXF file. Confirm that your coordinate order is correct for the CAD program you will be importing into.

Choose **No** when asked to **include** **QA data**.

Choose **No** when asked to **include FXL attributes**. (Choose yes if using FXLs)

Note: You can choose to have the control data for the project exported as well.

Choose where your file be stored. A flash drive is recommended, it will appear as a D: or E: drive in your drop-down menu.

Assign your file a name and then tap **Accept**.

Siteworks will let you know the file was exported successfully. Tap **Ok**. The file can now be found on the root of your flash drive.