Add Budget Distribution for a Position in UCPath
This guide provides step-by-step instructions to add a budget distribution for a position in UCPath.
26 steps
1
Navigate to UCPath [https://ucpath.universityofcalifornia.edu](https://ucpath.universityofcalifornia.edu/home)
2
On the **General Ledger Administration** homepage, click the **General Ledger Tasks** tile.
3
On the left navigation pane, expand the **Budget** section, and then select the **Budget Distribution** option.
Add New Value
4
Click the **Add a New Value** button.
5
Ensure the **Set ID** field displays the correct value: **LACMP** or **LAMED**.
6
In the **Department** field, type or select the department associated with the position. **NOTE:** The department in UCPath is always 6 digits.
7
In the **Position Number** field, type or select the position. **NOTE:** If you know the employee ID or name instead of the position number, click the **Look Up** icon to search for the position using the employee ID or name.
8
Click the **Add** button.
Budget Distribution Page
9
On the *Budget Distribution* page, review the **Job Data Snapshot** section. - The page displays details for the incumbent employee associated with the position on two tabs: **Job details 1** and **Job details 2**. - If the position is vacant, the fields are blank on these two tabs. - On the **Job details 2** tab, click the **Additional Pay** link link to review recurring additional pay earnings codes.
10
In the **Effective Date** field, type or select from the calendar icon the date the distribution should take effect. **NOTE:** UCPath uses the data on the most recent effective date for the entire year.
11
Based on the **Effective Date** entered, UCPath may display a message indicating the Annualized Budget Rate (ABR) has changed. Click the appropriate button: - Click the **OK** button to accept the new ABR. - Click the **Cancel** button to keep the existing ABR.
For this example, the **OK** button was clicked to accept the new ABR.
12
UCPath updates the **Position Budget** section based on the selected position. - If the position is vacant, the **ABR** value is the lowest value on the **Salary Grade** table. - If the position is filled, the **ABR** displays the incumbent's annual compensation from the employee's **Job Data**. - If there is more than one employee tied to the position, the **Annualized Budget Rate** value is an average of all employees' annual compensation rates.
13
Enter the budget line(s) in the **Budget Distribution** section using one of the following two methods: 1. Retrieve the position funding data from the *Funding Entry* page. Continue to the next section for instructions. 2. Manually enter the budget distribution lines on this page. Use the Table of Contents to navigate to the **Manually Enter Budget Distribution** section for instructions.
Retrieve Position Funding Data
14
Click the **Default Funding Entry** button to automatically update the **Budget Distribution** section with the current position funding data from the *Funding Entry* page. **NOTE:** Only unspecified earnings code lines are retrieved from the *Funding Entry* page.
Budget lines are not required to match funding lines. Any changes made in the **Budget Distribution** section are not copied back to the *Funding Entry* page.
The lines retrieved from the *Funding Entry* page do not populate the **Earn Code** and **Budget Sub** fields, which are required fields.
15
If needed, use the instructions in the following section to update any lines retrieved from the *Funding Entry* page.
Manually Enter Budget Distribution
16
In the **Earn Code** field of the new distribution line (required), type or select the earnings code associated with the distribution.
For this example, a line was entered for **REG** earnings code.
17
Enter the following in the next fields: - In the **Location** field (required), type **4**. - In the **Fund** field (required), type or select the appropriate fund. - In the **Account/CC** field (required), type or select the combined account and cost center. **NOTE:** When you click or tab out of the **Account/CC** field, UCPath automatically populates the **FS Dept** field.
18
Enter the following in the next fields: - In the **Project** field (optional), type or select the appropriate project. - Refer to the [UCPath Project Code Maintenance](https://fsw.ais.ucla.edu/ProjectCode) website for questions regarding project code creation and maintenance. - In the **Sub Override** field (optional), type or select: - **00** for Faculty/Academics. - **01** for Staff. - **02** for some Academics.
19
In the **Budget End Date** field, type or select from the calendar icon the date the distribution should end only if it ends prior to the end of the fiscal year.
For this example, the **Budget End Date** was not entered.
20
In the **Budget FTE** field, enter the appropriate FTE. **NOTE:** The **Budget FTE** cannot exceed the position FTE. The **Budget FTE** should be any number between 0 and 1. For example, a position that has a 25% FTE should be entered as 0.25.
**Budget FTE** is not the same as the pay distribution percentage on the *Funding Entry* page.
UCPath updates the **Budget Amount** field based on the value in the **Budget FTE** field.
21
From the **Budget Sub** list of values, select the appropriate option.
For this example, **Staff-Sal** was selected.
22
Verify the **STF Flag** check box is selected. **NOTE:** The **STF Flag** indicates whether the row should appear on the Staffing Roster. If the check box is not selected, the budget data does not appear on the Staffing Roster.
23
To add a new line in the **Budget Distribution** section, click the **Add** button and then repeat the previous 7 steps to enter additional distribution lines.
24
If necessary, click the **Delete** icon to remove any distribution lines.
Save Distribution
25
After all lines have been entered, click the **Save** button.
26
UCPath displays the user ID, date, and time for the save.
Add Budget Distribution for a Position in UCPath
This guide provides step-by-step instructions to add a budget distribution for a position in UCPath.
26 steps
1
Navigate to UCPath [https://ucpath.universityofcalifornia.edu](https://ucpath.universityofcalifornia.edu/home)
2
On the **General Ledger Administration** homepage, click the **General Ledger Tasks** tile.
3
On the left navigation pane, expand the **Budget** section, and then select the **Budget Distribution** option.
Add New Value
4
Click the **Add a New Value** button.
5
Ensure the **Set ID** field displays the correct value: **LACMP** or **LAMED**.
6
In the **Department** field, type or select the department associated with the position. **NOTE:** The department in UCPath is always 6 digits.
7
In the **Position Number** field, type or select the position. **NOTE:** If you know the employee ID or name instead of the position number, click the **Look Up** icon to search for the position using the employee ID or name.
8
Click the **Add** button.
Budget Distribution Page
9
On the *Budget Distribution* page, review the **Job Data Snapshot** section. - The page displays details for the incumbent employee associated with the position on two tabs: **Job details 1** and **Job details 2**. - If the position is vacant, the fields are blank on these two tabs. - On the **Job details 2** tab, click the **Additional Pay** link link to review recurring additional pay earnings codes.
10
In the **Effective Date** field, type or select from the calendar icon the date the distribution should take effect. **NOTE:** UCPath uses the data on the most recent effective date for the entire year.
11
Based on the **Effective Date** entered, UCPath may display a message indicating the Annualized Budget Rate (ABR) has changed. Click the appropriate button: - Click the **OK** button to accept the new ABR. - Click the **Cancel** button to keep the existing ABR.
For this example, the **OK** button was clicked to accept the new ABR.
12
UCPath updates the **Position Budget** section based on the selected position. - If the position is vacant, the **ABR** value is the lowest value on the **Salary Grade** table. - If the position is filled, the **ABR** displays the incumbent's annual compensation from the employee's **Job Data**. - If there is more than one employee tied to the position, the **Annualized Budget Rate** value is an average of all employees' annual compensation rates.
13
Enter the budget line(s) in the **Budget Distribution** section using one of the following two methods: 1. Retrieve the position funding data from the *Funding Entry* page. Continue to the next section for instructions. 2. Manually enter the budget distribution lines on this page. Use the Table of Contents to navigate to the **Manually Enter Budget Distribution** section for instructions.
Retrieve Position Funding Data
14
Click the **Default Funding Entry** button to automatically update the **Budget Distribution** section with the current position funding data from the *Funding Entry* page. **NOTE:** Only unspecified earnings code lines are retrieved from the *Funding Entry* page.
Budget lines are not required to match funding lines. Any changes made in the **Budget Distribution** section are not copied back to the *Funding Entry* page.
The lines retrieved from the *Funding Entry* page do not populate the **Earn Code** and **Budget Sub** fields, which are required fields.
15
If needed, use the instructions in the following section to update any lines retrieved from the *Funding Entry* page.
Manually Enter Budget Distribution
16
In the **Earn Code** field of the new distribution line (required), type or select the earnings code associated with the distribution.
For this example, a line was entered for **REG** earnings code.
17
Enter the following in the next fields: - In the **Location** field (required), type **4**. - In the **Fund** field (required), type or select the appropriate fund. - In the **Account/CC** field (required), type or select the combined account and cost center. **NOTE:** When you click or tab out of the **Account/CC** field, UCPath automatically populates the **FS Dept** field.
18
Enter the following in the next fields: - In the **Project** field (optional), type or select the appropriate project. - Refer to the [UCPath Project Code Maintenance](https://fsw.ais.ucla.edu/ProjectCode) website for questions regarding project code creation and maintenance. - In the **Sub Override** field (optional), type or select: - **00** for Faculty/Academics. - **01** for Staff. - **02** for some Academics.
19
In the **Budget End Date** field, type or select from the calendar icon the date the distribution should end only if it ends prior to the end of the fiscal year.
For this example, the **Budget End Date** was not entered.
20
In the **Budget FTE** field, enter the appropriate FTE. **NOTE:** The **Budget FTE** cannot exceed the position FTE. The **Budget FTE** should be any number between 0 and 1. For example, a position that has a 25% FTE should be entered as 0.25.
**Budget FTE** is not the same as the pay distribution percentage on the *Funding Entry* page.
UCPath updates the **Budget Amount** field based on the value in the **Budget FTE** field.
21
From the **Budget Sub** list of values, select the appropriate option.
For this example, **Staff-Sal** was selected.
22
Verify the **STF Flag** check box is selected. **NOTE:** The **STF Flag** indicates whether the row should appear on the Staffing Roster. If the check box is not selected, the budget data does not appear on the Staffing Roster.
23
To add a new line in the **Budget Distribution** section, click the **Add** button and then repeat the previous 7 steps to enter additional distribution lines.
24
If necessary, click the **Delete** icon to remove any distribution lines.
Save Distribution
25
After all lines have been entered, click the **Save** button.
26
UCPath displays the user ID, date, and time for the save.