Remove a Position from the Staffing Roster
This guide provides details for three options to remove a position from the Staffing Roster.
4 steps
1
Use one of the following three options to remove a position from the Staffing Roster: - Deselect the **STF Flag** on the budget distribution line(s). - Change the budget distribution **Status** to **Inactive**. - Change the position status to **Inactive**.
Deselect the STF Flag
2
If the position will be used again in the future, update the budget distribution and deselect the **STF Flag** check box. Refer to [Update Budget Distribution for a Position in UCPath](https://scribehow.com/shared/Update_Budget_Distribution_for_a_Position_in_UCPath__ziUsYRDTT5-FFEbXEvQuOA) for instructions.
Change the Budget Distribution Status to Inactive
3
If the position will be used again in the future, update the budget distribution and change the **Status** to **Inactive**. Refer to [Update Budget Distribution for a Position in UCPath](https://scribehow.com/shared/Update_Budget_Distribution_for_a_Position_in_UCPath__ziUsYRDTT5-FFEbXEvQuOA) for instructions.
Change the Position Status to Inactive
4
If the position will no longer be used and will never be filled again, the position status can be changed to **Inactive** using the *Position Control Request* page. - Only vacant positions can be updated to Inactive status.\ **NOTE:** Positions cannot be deleted in UCPath. - Work with your department’s HR Initiator to update the position.\ **NOTE:** Budget Initiators and HR Initiators should communicate with each other when permanently budgeted positions are vacated. Reuse existing positions whenever possible. - When the position status is Inactive, the position cannot be reused or returned to active status.
Remove a Position from the Staffing Roster
This guide provides details for three options to remove a position from the Staffing Roster.
4 steps
1
Use one of the following three options to remove a position from the Staffing Roster: - Deselect the **STF Flag** on the budget distribution line(s). - Change the budget distribution **Status** to **Inactive**. - Change the position status to **Inactive**.
Deselect the STF Flag
2
If the position will be used again in the future, update the budget distribution and deselect the **STF Flag** check box. Refer to [Update Budget Distribution for a Position in UCPath](https://scribehow.com/shared/Update_Budget_Distribution_for_a_Position_in_UCPath__ziUsYRDTT5-FFEbXEvQuOA) for instructions.
Change the Budget Distribution Status to Inactive
3
If the position will be used again in the future, update the budget distribution and change the **Status** to **Inactive**. Refer to [Update Budget Distribution for a Position in UCPath](https://scribehow.com/shared/Update_Budget_Distribution_for_a_Position_in_UCPath__ziUsYRDTT5-FFEbXEvQuOA) for instructions.
Change the Position Status to Inactive
4
If the position will no longer be used and will never be filled again, the position status can be changed to **Inactive** using the *Position Control Request* page. - Only vacant positions can be updated to Inactive status.\ **NOTE:** Positions cannot be deleted in UCPath. - Work with your department’s HR Initiator to update the position.\ **NOTE:** Budget Initiators and HR Initiators should communicate with each other when permanently budgeted positions are vacated. Reuse existing positions whenever possible. - When the position status is Inactive, the position cannot be reused or returned to active status.