Action | Sequence | Light | Description | Troubleshooting Steps |
|---|---|---|---|---|
Startup | Quick 0.5 second flashing | Blue LED | Indicates the device is initializing after power on | |
Idle | 1 second flash | Blue LED | Looking for GPS fix | |
Active | 3 second flash | Blue LED | GPS fixed, LED flashes with each log written (frequency varies with logging interval selected) | |
Shutdown | Circular sequence flashing of every LED | All LED | During device shutdown which is triggered by user input, low battery, or sleep timeout. Note: Older firmware may not flash the red LED | |
Flow Indicator | Flashes for 3 seconds | Red LED | This will occur each time liquid is passed through the device and the GPS has a fix (Active). | |
Charging | Light remains solid | Red LED | Lights up when the charger is attached | |
Data transfer Initiation | Quick 0.5 second flashing Solid | Blue LED Red LED | Initiated by placing device onto charge | |
Data Transfer: Connected | Solid Solid | Blue LED Red LED | Automatic | |
Type | Sequence | Light | Description | Troubleshooting |
|---|---|---|---|---|
Battery Flat | Rapid flashing | Green & Blue LED | Indicates battery voltage is below the minimum threshold. Device will shut down after a few seconds. | |
- Sequence: Green LEDs light up
- Description: Indicates weed selection during normal operation.
- Sequence: Corresponding weed LED flashes at 2Hz with 50% duty cycle for 1.5 seconds
- Description: Indicates a pin drop when the weed select button is held.
- Sequence: Leftmost and rightmost weed LEDs flash alternately at 0.5Hz with 50% duty cycle
- Description: Indicates entry into calibration mode.
- Sequence: Leftmost and rightmost weed LEDs flash alternately at 2Hz with 50% duty cycle
- Description: Indicates calibration has been saved.
- Sequence: All 3 weed LEDs flash alternately in a "marquee" fashion at 0.75Hz with 30% duty cycle
- Description: Indicates entry into rinse mode.
- Sequence: All 3 weed LEDs flash alternately in a "marquee" fashion at 2Hz with 30% duty cycle
- Description: Indicates rinse is complete.
- Sequence: Gear + weed 3 button held together
- Low Battery: Weed 1 flashing at 1Hz 50% duty
- Medium Battery: Weed 1 and 2 flashing at 1Hz 50% duty
- High Battery: Weed 1, 2, and 3 flashing at 1Hz 50% duty
- Battery Levels: - Low: 0% - 30% - Medium: 30% - 70% - High: >70%
- Sequence: Gear + weed 1 button held together
- GPS Status: - No lock: Weed LED 1 flashes at 2Hz with 30% duty cycle - Lock: Solid green LED
- LTE Status: - No connection: Weed LED 2 flashes at 2Hz with 30% duty cycle - Connection: Solid green LED
- Sequence: Red and blue LEDs solid, green LEDs indicate progress
- Progress Levels: - Weed 1: Minimum progress - All 3 weed LEDs: Maximum progress.