How to integrate Triton ULTRA Devices with ExacqVision

This guide provides a comprehensive step-by-step process for integrating Triton ULTRA devices with ExacqVision.

Jack Guerrisi
14 steps
3 minutes

Config Tool

Tritonsensors

Scribe for Windows

Localhost

Pre-requirements for the integration

1. Administrator Access to exacqVision Client 2. Administrator Access to local Triton ULTRA webUI 3. Network rules allowing communication between Triton ULTRA and exacqVision server.

Configuring Triton ULTRA

Open Local Triton ULTRA webUI and navigate to *Platform Integrations > TCP Settings*

Enter the IP address of the ExacqVision server in the *Host* field and *1234* in the *Port* field.

Change the content type from *JSON* to *Text*, and enter *triton.%EID@TRIGGERNAME%* in the *Set String* field.

Select *Save* at the bottom of the page.

Navigate to *Actions > Action Settings* and check the boxes under the *TCP* for the events that you would like to trigger the integration. Select *Save All* when completed.

Configuring ExacqVision

Navigate to the *Config* Page

Navigate to *Serial Profiles,* select *New*\ Add a *Profile Name*\ Type *triton* in the *SOT Marker* field\ Choose a Marker Type of *standard*\ Check the box for *Case Sensitive*\ Click *Apply* to save the profile

Navigate to *Serial Port*\ Select *New*\ Add a name to the Serial Port\ Select *Access Ctrl* for Use\ Select the name of the profile created in the previous step\ Select *TCP Listener* in the Type field\ Add the IP Address of the Triton ULTRA device in the *Address* Field\ Add the associated port in the *Port* field(in this guide the chosen port was 1234)\ Click *Apply* to save

Navigate to *Serial Profiles*\ Select *Event Keywords*\ Select *New*\ Add *triton.<Event Identifier>*(in the example we have chosen *Aggression, Vape, and THC; be sure to exlude '<' '>')* \ Click *Apply* to save the changes

To link Triton ULTRA events to ExacqVision actions, navigate to *Event Linking*\ Select *New*\ Choose *Serial Port* as the event Type\ Choose the associated Event Source from the Keywords previously defined in your created profile\ Choose the desired Action Type\ Select *Apply* to save changes

Adding Triton ULTRA RTSP Stream

To add the Triton ULTRA RTSP stream to ExacqVision, select *Add IP Cameras*

Select *New*

Choose *RTSP* for the Device Type\ Enter *rtsp://<IP Address>:554/live* (be sure to exclude '<' '>' when adding the IP address of your Triton ULTRA Sensor\ Click *Apply* to add the RTSP stream