Hard resetting a Triton ULTRA sensor will return it to factory defaults and will remove any data on the device including sensor name, IP configuration, and password. The default username is admin and password is 111111. The sensor will also grab a DHCP address, defaulting the sensor on a non-DHCP server can brick the device. Use the device manager to find the IP address.
The hard reset feature is only available on devices shipped from January, 2025 onwards.
Power On the Device
Ensure the sensor is plugged in and powered on.
Remove the Backplate
Locate and unscrew the security screw securing the backplate.
Carefully remove the backplate to access the reset button.
Locate the Reset Button Hole
The reset hole is on the back of the device near the MAC Address sticker.
Insert Paperclip
Insert a paperclip or similar tool into the reset hole.
Hold Until Rainbow Flash
Press and hold the reset button inside the hole.
Keep holding until the LED lights flash rainbow colors on the front of the device.
Release
Once the lights flash rainbow, release the button. The device will now reset and reboot.