LED Light Sequences & Troubleshooting Guide | Scribe

LED Light Sequences & Troubleshooting Guide

  • 7 months ago



    Action

    Sequence

    Light

    Description

    Troubleshooting Steps

    Startup

    Quick 0.5 second flashing


    Blue LED

    Indicates the device is initializing after power on


    Idle

    1 second flash

    Blue LED

    Looking for GPS fix


    Active

    3 second flash

    Blue LED

    GPS fixed, LED flashes with each log written (frequency varies with logging interval selected)


    Shutdown

    Circular sequence flashing of every LED

    All LED

    During device shutdown which is triggered by user input, low battery, or sleep timeout.


    Note: Older firmware may not flash the red LED


    Flow Indicator

    Flashes for 3 seconds

    Red LED

    This will occur each time liquid is passed through the device and the GPS has a fix (Active).


    Charging

    Light remains solid

    Red LED

    Lights up when the charger is attached


    Data transfer Initiation

    Quick 0.5 second flashing


    Solid

    Blue LED


    Red LED

    Initiated by placing device onto charge


    Data Transfer: Connected

    Solid


    Solid

    Blue LED


    Red LED

    Automatic







    Errors

    Type

    Sequence

    Light

    Description

    Troubleshooting

    Battery Flat

    Rapid flashing

    Green & Blue LED

    Indicates battery voltage is below the minimum threshold. Device will shut down after a few seconds.








    Weed Toggle

    - Sequence: Green LEDs light up

    - Description: Indicates weed selection during normal operation.

    Drop Pin

    - Sequence: Corresponding weed LED flashes at 2Hz with 50% duty cycle for 1.5 seconds

    - Description: Indicates a pin drop when the weed select button is held.

    Calibration

    - Sequence: Leftmost and rightmost weed LEDs flash alternately at 0.5Hz with 50% duty cycle

    - Description: Indicates entry into calibration mode.

    Calibration Save

    - Sequence: Leftmost and rightmost weed LEDs flash alternately at 2Hz with 50% duty cycle

    - Description: Indicates calibration has been saved.

    Rinse

    - Sequence: All 3 weed LEDs flash alternately in a "marquee" fashion at 0.75Hz with 30% duty cycle

    - Description: Indicates entry into rinse mode.

    Rinse Complete

    - Sequence: All 3 weed LEDs flash alternately in a "marquee" fashion at 2Hz with 30% duty cycle

    - Description: Indicates rinse is complete.

    Battery Check

    - Sequence: Gear + weed 3 button held together

    - Low Battery: Weed 1 flashing at 1Hz 50% duty

    - Medium Battery: Weed 1 and 2 flashing at 1Hz 50% duty

    - High Battery: Weed 1, 2, and 3 flashing at 1Hz 50% duty

    - Battery Levels: - Low: 0% - 30% - Medium: 30% - 70% - High: >70%

    LTE/GPS Check

    - Sequence: Gear + weed 1 button held together

    - GPS Status: - No lock: Weed LED 1 flashes at 2Hz with 30% duty cycle - Lock: Solid green LED

    - LTE Status: - No connection: Weed LED 2 flashes at 2Hz with 30% duty cycle - Connection: Solid green LED

    Writing to Flash

    - Sequence: Red and blue LEDs solid, green LEDs indicate progress

    - Progress Levels: - Weed 1: Minimum progress - All 3 weed LEDs: Maximum progress.