Washroom Quick Setup!
Microshare
Android: https://mch.re/Droid-DeployM
IOS: https://mch.re/iOS-DeployM
Step 1: Download the Deploy-M2 app on your phone using the Camera app on your phone!
Launch and Login to DeployM2
Step 2: Identify and Assemble your first Gateway! It can be either iFemto or iZepto
Assemble a Gateway - iFemto
Assemble a Gateway - iZepto
Step 3: Scan and plug in your first Gateway!
Scan QR Code, Tag, and Install the iFemto Gateway
Scan QR Code, Tag, and Install the iZepto Gateway
Step 4: Scan and install your first Push Button Device!
Scan & Tag a Washroom Push Button Device
Step 4a (Optional): Scan and install your first Washroom Traffic Sensor!
Scan and Tag a Washroom Traffic Sensor
Step 5: Finish tutorial and checkout EverSmart Clean!
Wrap-up and Launch EverSmart Clean!
Supplemental Information:
Setting up a Wireless Network with a Gateway
To create a wireless network for the devices at your location, you will need to set up a gateway. The gateway serves as a central hub that receives and transmits data between the devices and EverSmart Clean app. Here's how to set it up:
1. Identify a suitable location for the gateway, most sites with less than 25,000 square feet and no more than 3 floors can be covered with a single gateway. You’ll need access to a mains power supply to plug in the gateway.
2. Unsure that your gateway location has good cell phone coverage? Hint: Look for a location where you have at least 3 bars of coverage on your cell phone.
3. Power on the gateway and wait for it to establish a connection with the network. A successful connection is shown by two solid green lights. Hint: it can take a 2 - 3 minutes to complete the connection.
Once the gateway is set up, it will create a wireless network that the devices can join.
Data will start flowing within 24 hours of installing tagging the gateway and devices.