(Basic) microPC Command List

Be sure to confirm the microPC you're working on - not all commands listed work interchangeably

1A. (Pi) Testing & Setting Banshee Pins

1

## Pin 6 Test echo "0" > /sys/class/gpio/gpio6/value ; sleep 5 ; echo "1" > /sys/class/gpio/gpio6/value ## Pin 7 Test echo "0" > /sys/class/gpio/gpio7/value ; sleep 5 ; echo "1" > /sys/class/gpio/gpio7/value ## Set Pin Assignment sudo nano /etc/atf/atf-service.conf ## Restart Hardware Controller /etc/init.d/atf-hardware-service restart

1B. (Fitlet) Testing & Setting Banshee Pins

2

##Old Vision I/O Board ## Pin 15 Test curl localhost:5000/gpio_trigger_to_state/15/0; sleep 3 ; curl localhost:5000/gpio_trigger_to_state/15/1 ## Pin 14 Test curl localhost:5000/gpio_trigger_to_state/14/0 ; sleep 3 ; curl localhost:5000/gpio_trigger_to_state/14/1 ## Updated Fitlet-Old Vision I/O Board sudo nano /home/prod/src/02-Vision-Integration/Fitlet2-ATFVision-Repo/00-FT232H-Flask-Driver/ft232_pyftdi/production/fitlet_ft2232h_cbus_api.py ##New Vision I/O Board ## Pin 15 Test curl localhost:5000/gpio_trigger_to_state/15/1; sleep 3 ; curl localhost:5000/gpio_trigger_to_state/15/0 ## Pin 14 Test curl localhost:5000/gpio_trigger_to_state/14/1 ; sleep 3 ; curl localhost:5000/gpio_trigger_to_state/14/0 ## Set Pin Assignment sudo nano /home/prod/src/02-Vision-Integration/Fitlet2-ATFVision-Repo/01-TwoBullsIntegration/two-bulls-repo/config/global.conf ## Stop Hardware Controller sudo supervisorctl stop ft232-flask-api ; sleep 5 ; sudo supervisorctl stop atf-hardware-service ; sleep 2 ; sudo supervisorctl stop atf-web-service ; sleep 1 ; sudo pkill -f -9 [atf-web.py](http://atf-web.py) ## Start Hardware Controller sudo supervisorctl start ft232-flask-api ; sleep 5 ; sudo supervisorctl start atf-hardware-service ; sleep 2 ; sudo supervisorctl start atf-web-service

1C. (RS34) Testing & Setting Banshee Pins

3

## Pin 15 Test curl localhost:5000/gpio_trigger_to_state/15/1; sleep 3 ; curl localhost:5000/gpio_trigger_to_state/15/0 ## Pin 14 Test curl localhost:5000/gpio_trigger_to_state/14/1 ; sleep 3 ; curl localhost:5000/gpio_trigger_to_state/14/0 ## Set Pin Assignment sudo nano /home/prodrs34/src/visioni_edge_repo/01-TwoBullsIntegration/two-bulls-repo/config/global.conf ## Stop Hardware Controller sudo supervisorctl stop ft232-flask-api ; sleep 5 ; sudo supervisorctl stop atf-hardware-service ; sleep 2 ; sudo supervisorctl stop atf-web-service ; sleep 1 ; sudo pkill -f -9 [atf-web.py](http://atf-web.py) ## Start Hardware Controller sudo supervisorctl start ft232-flask-api ; sleep 5 ; sudo supervisorctl start atf-hardware-service ; sleep 2 ; sudo supervisorctl start atf-web-service

2A. (Pi) Formatting Flash Drive

4

## Stop NFS Service /etc/init.d/nfs-kernel-server stop ## Check USB Mount Point fdisk -l ## Unmount USB umount /dev/sda1 /media/DATA ## Format USB to ext4 mkfs.ext4 /dev/sda1 ## Mount USB to Target Directory mount /dev/sda1 /media/DATA ## Apply Full Access Permission chmod 777 /media/DATA ## Restart NFS Service /etc/init.d/nfs-kernel-server start

2B. (Fitlet) Clearing SSD Storage

5

## Check Filesystem Usage df -h ## Clear Target Directory sudo rm /media/SSD/10* -r

2C. (RS34) Clearing SSD Storage

6

## Check Filesystem Usage df -h ## Clear Target Directory sudo rm /media/ssd_sata/10* -r

3A. (Pi) Setting Time & Date

7

timedatectl set-timezone Australia/Adelaide timedatectl set-timezone Australia/Brisbane timedatectl set-timezone Australia/Darwin timedatectl set-timezone Australia/Perth timedatectl set-timezone Australia/Sydney

3B. (Fitlet) Setting Time & Date

8

timedatectl set-timezone Australia/Adelaide timedatectl set-timezone Australia/Brisbane timedatectl set-timezone Australia/Darwin timedatectl set-timezone Australia/Perth timedatectl set-timezone Australia/Sydney

3C. (RS34) Setting Time & Date

9

timedatectl set-timezone Australia/Adelaide timedatectl set-timezone Australia/Brisbane timedatectl set-timezone Australia/Darwin timedatectl set-timezone Australia/Perth timedatectl set-timezone Australia/Sydney