CLE Automazioni - 3 - Change IP Address
- Enrico Gaffuri |
- 6 steps |
- 26 seconds
1
Navigate to [https://192.168.1.50/hsycoserver/manager](https://192.168.1.50/hsycoserver/manager)
2
Click Admin
3
Click Network.
4
Modify the IP address
5
If HSYCO is running on a server with 2 ethernet ports you can configure 2 separate IP addresses.
6
Click "Save". HSYCO implements a safety mechanism that in most cases would automatically revert, after 5 minutes from the change, the network settings to the original configuration if for any reason network access to HSYCO is lost after a change.
