CLE Automazioni - 9 - Add a serial usb card reader | Scribe

    CLE Automazioni - 9 - Add a serial usb card reader

    • Enrico Gaffuri |
    • 30 steps |
    • 2 minutes
      alert ordinal icon
      Connect your USB serial reader to a USB port of HSYCO before the following steps
      1
      Navigate to [https://192.168.1.50/hsycoserver/manager](https://192.168.1.50/hsycoserver/manager)
      2
      Click on Settings and select "Comm Ports"
      3
      Click "+" to add a new serial port.
      4
      Click "Type".
      5
      Select "serial"
      6
      Specify an id, you can type any name with no spaces, no special character, no capital letters.
      7
      For example yype "cardreader"
      8
      Click "OK"
      9
      Specify the USB serial port name. The USB reader is seen has ttyACM0 on every HSYCO Strato server.
      10
      Type "ttyACM0"
      11
      Select "Baud rate".
      12
      Type "9600"
      13
      Select "Data bits".
      14
      Select "8".
      15
      Select "Stop bits".
      16
      Select "1".
      17
      Select "Parity".
      18
      Click "None".
      19
      Select "Flow Control"