CLE automazioni - 4 - Add communication port | Scribe

    CLE automazioni - 4 - Add communication port

    • Enrico Gaffuri |
    • 16 steps |
    • 2 minutes
      1
      Navigate to [https://192.168.1.50/hsycoserver/manager](https://192.168.1.50/hsycoserver/manager) and login
      2
      Click "Settings".
      3
      Click "Comm Ports".
      4
      Click "+" to add a new communication port
      5
      Click the input field "Type".
      6
      Select "serial".
      7
      Click the input field "ID".
      8
      Insert a name for the communication port and then click "OK"
      9
      Select the newly created communication port. Click this input field "Port" with the correct value. For HSYCO Strato based servers the port name is ttyAMA0.
      10
      Click the input field "Baud rate" and input the correct value. Default value is 57600
      11
      Click "Data bits" field and select the correct value. Default value is 8
      12
      Click the input field "Stop bits" and select the correct value. Default value is 1
      13
      Click the input field "Parity" and select the correct value. Default value is None
      14
      Click the input field "Flow control" and select none.
      15
      Click "Save"
      16
      Click "Save" again for confirmation and restart