Configure Network Connection: Android | Scribe

    Configure Network Connection: Android

    • Zach Verstraete |
    • 10 steps |
    • 27 seconds
      1
      Connect a wireless keyboard and mouse to your Android device.
      2
      Press the ESC key to stop Breeze software.
      3
      Click "CANCEL AUTOPLAY" before the 5 second timer runs out. If the countdown ends and Breeze restarts, repeat step 1 as needed.
      4
      The "Ethernet" box will display your current connection status. To access settings, click on the "Ethernet" box.
      5
      After clicking the "Ethernet" box, you will be directed to the Ethernet information page to check your settings. Press the ESC key to be directed back to the Breeze launcher page.
      6
      Select "CANCEL AUTOPLAY" to stop Breeze software from auto starting.
      7
      The "Wi-Fi" box will display your current connection status. To access settings, click on the "Wi-Fi" box.
      8
      After clicking the "Wi-Fi" box, you will be directed to the Wi-Fi information page to check your settings. Press the ESC key to be directed back to the Breeze launcher page. Note: Wi-Fi is not turned on when new devices are shipped. You will have to toggle Wi-Fi to "On" before being able access any wireless networks.
      9
      After Wi-Fi is turned on, available networks will be visible. You may also manually add a network by clicking the "Add network" button. When the connection is successful, the connection status will read "Connected". When you are finished configuring your Wi-Fi settings, press the ESC button to be directed back to the Breeze launcher page.
      10
      After your network credentials are configured, allow the auto-play timer to expire and Breeze will restart automatically.
      information ordinal icon
      If you have any questions or need assistance, please visit our [website](https://helpdesk.keywesttechnology.com/portal/en/home), or contact our Helpdesk: [[email protected]](mailto:[email protected])