How to apply coatings in the Shower Designer

This guide provides step-by-step instructions on how to apply coatings in the Shower Designer. It covers applying coatings to all panels, editing coating face details and removing coatings from specific panels. By following this guide, users can easily apply and customize coatings in the Shower Designer. Coatings are any fabrication process applied to the surface/s of the panel such as, but not limited to, Enduroshield or Diamon Fusion.

5 steps

Obe

Smartglazier

Apply a coating to all panels

Select an option from the **"Coating"** field in the **Design** tab. This will apply the selected coating to *all panels* in the shower.

Check the **"Coating Face"** field to see which face of the panel the coating has been applied to. Click into this field to apply the coating to a different panel face. *Note: Most shower-type coatings like Enduroshield, Clearshield, and/or Diamon Fusion default to applying to the back face of the glass.*

Apply a partial coating (specific panels)

Click **"Features"**

To add a coating to specific panels: - Click **"Coatings"**

- Select a "**Coating Type"** - Check/edit the **"Face"** field. - Select panels in the **"Apply To"** section - Click **"+ Apply Coating"** to confirm