Connect your VFC800-WiFi/VFC400-WiFI to your computer with the included Micro-USB cable

Enter in the name of what you would like Ch1 to be called

Repeat for Channel 2 if you have a 2nd probe and are using it.

Choose if which channels you are recording data from (your logger will show which channel you are plugging the probe into)

Set how often you would like your data logger to record a reading

Enter your upper temperature limit. For a fridge this is typically 8°C or 46°F, for a freezer this is typically -15°C or 5°F

Enter your lower temperature limit.  For a fridge this is typically 2°C or 36°F, for a freezer it is typically -40°C or -40°F

Note:  Standard data loggers have a low limit of -40°C.  Attempting to set a temperature below this will not save.

Select if you would like the data logger to display the temperature in °F or °C.  Note:  This will NOT change the software to display the temperature scale, this is ONLY for the data logger itself.

Tip:  If you would like to change the temperature scale your software is displaying, that can be done in the Edit > Options menu.  This is discussed in the "Software Setup" guide.

Select your wireless network from the SSID dropdown 

Enter your wireless network password in the WiFi Password field

Your data logger has been configured and is now ready for use

How to configure your VFC400-WiFi / VFC800-WiFi data logger