How to connect 2 endpoints on LAN in Birddog Cloud | Scribe

    How to connect 2 endpoints on LAN in Birddog Cloud

    • Jan Grimestad |
    • 0 step |
    • 29 seconds
    Right-click on the first endpoint. In this case BDHQ - Ryzen 1
    Click "Edit"
    Click "Settings"
    Click the "Local IP" field.
    Set the local ip address for EP 1 and click "Save"
    Right-click on EP 2, in this case Ryzen 2.
    Click "Edit"
    Click "Settings"
    Click the "Local IP" field.
    Enter the local ip address for EP 2 and click "Save"
    Tip! Using the local ip on 2 EP on the same local network is a great way to start testing BirdDog Cloud and to test that NDI sources and configurations are working optimal.
    Alert! When 2 EP has local ip address set up they will try to use these ip addresses for the SRT connection. Do NOT set a local ip address on any endpoint unless you in fact want to connect on LAN. If the 2 EP are on totally separate networks they probably will not be able to connect to each other using these ip addresses.
    This Scribe is in tip-top shape!Leave feedback if there are any issues with this Scribe