How to enter a specified EUR onto the Analog table | Scribe

    How to enter a specified EUR onto the Analog table

    • Randy Strauss |
    • 8 steps |
    • 38 seconds
      1
      Select the Asset or create a new asset. In this example an preexisting Asset with an existing analog has been selected.
      2
      The qf, final rate, is cleared to put the analog in an unresolved or uncalculatable with present data state. Right-click on the gas1 qf input.
      3
      Select Clear Value to remove the value. This will make the EUR and other fields editable.
      4
      Select the EUR filed for the gas1 analog.
      5
      Double left-click the input field.
      6
      Remove the existing value and type "102000" and press the enter key.
      7
      Observe that since an obtainable EUR has been input, the qf has been calculated.
      8
      Observe that the EUR is no longer an input value but has become a calculated value and the Seg. REM has become the input value which equals the EUR minus the Prior Cum. This procedure is not limited to the EXPONENTIAL DCA Type.
      information ordinal icon
      Tip! An analog can have its units changed after the values are calculated. The change is to the display not the stored values.