How to set up a multi stream using BirdDog Cloud | Scribe

    How to set up a multi stream using BirdDog Cloud

    • Jan Grimestad |
    • 20 steps |
    • 2 minutes
    1
    Click on the EP that you want to send the multi stream from.
    2
    Click on the + button to create a new outgoing connection.
    3
    Double-click on the native SRT button (or click + OK button)
    4
    Click "Multistream"
    5
    Select the first source.
    6
    Select the second source.
    7
    Select the third source.
    8
    Select the target EP for the multistream.
    9
    Select the encoder configuration.
    10
    Click "Multistream" to edit the multistream setup.
    11
    Choose your audio setup and alternative output and failover.
    12
    Click "SRT" to change default values of the SRT parameters.
    13
    Click "Cloud Connect SRT Configuration" after finishing the SRT setup.
    14
    Click "Connect" to start the stream.
    15
    Right-click here or click on the kebab menu to show details.
    16
    Click "Show details"
    17
    On the details pane to the right you can see details about the stream.
    18
    To stop the stream Right-click on the thumbnail (or click on the kebab menu).
    19
    Click "Delete" to remove the stream, click stop to stop the stream,
    20
    Multi stream is used when you want to send multiple NDI streams over SRT and maintain individual sync between the streams. This is usable for multi cam contribution. You can of course setup multiple single streams, but the individual sync is best upheld by using the Multi stream feature.