Lighting Troubleshooting | Scribe

    Lighting Troubleshooting

    • Joshua Malloy |
    • 30 steps |
    • 2 minutes

    NETWORK: Make sure the computer is on the "NH PRODUCTION" network

    1
    Click on the Wifi icon
    2
    Select "NH PRODUCTION" - The Wifi logo should light up blue when connected to the network.

    MIDI SETUP: Ensure "BOME MIDI NETWORK" is functioning correctly

    3
    Click on the "B" icon
    4
    Click "Show"
    5
    There should be a computer that shows up in this list. If not, make sure the lighting computer is on and connected to the same network.
    6
    Make sure "IAC Driver Midi Pipe - iMac" under the "Remote Direct MIDI" section is on.
    7
    Make sure "Auto-accept connections without confirmation" is turned on
    8
    Click "Back" when you are done. Settings will autosave
    9
    You can now close out BOME Midi

    PROPRESENTER: Ensure ProPresenter is working properly

    10
    Open ProPresenter
    11
    Click "ProPresenter" in the menu bar
    12
    Go to "Settings"
    13
    Select "Devices"
    14
    Select "Disconnect" in order to access the settings
    15
    Click "Settings"
    16
    Ensure "IAC Driver Midi Pipe - iMac" is checked. Click "Back" when done.
    17
    Click "Connect" in order to reconnect ProPresenter to the lighting software