Updating FT200/FT-RD Firmware with Flagtronics Device Manager Software | Scribe

    Updating FT200/FT-RD Firmware with Flagtronics Device Manager Software

    • 22 steps |
    • 5 minutes
    1
    Go to [www.flagtronics.com](http://www.flagtronics.com) on your Windows based PC or Laptop. If Device Manager is already installed, skip forward to **Step 10**.
    2
    Click "Downloads"
    3
    Click "Flagtronics Device Manager" to begin the download.
    4
    Click "Downloads Icon" or similar icon if not using Chrome Browser.
    5
    Click "Open" icon to install software
    6
    If presented with Microsoft Defender screen, click "More Info". If not, skip to Step 8.
    7
    Click "Run anyway"
    8
    Click "Install"
    9
    Once completed, Click "Finish" to launch Flagtronics Device Manager software
    10
    When the software opens, if your computer is connected to the internet, it will download the latest Firmware from the cloud. Therefore, once you connect the USB plug of your In-Car Device to your computer, you won't have to be connected to the Internet to update your In-Car Device to the latest Firmware.
    11
    Connect your Flagtronics In-Car Device to your computer via the [USB Plug at the end of the wiring harness](https://flagtronics.com/cdn/shop/products/DSC_0017_2048x.jpg?v=1627660139). You will see a confirmation screen showing your Devices Serial Number. In this example, it's 20001429. Click "Got It". **NOTE**: *Depending on the location of the harness, you may want to invest in an [USB Extension Cable](https://www.amazon.com/Extension-ITANDA-Transfer-Keyboard-Playstation/dp/B08FJ88BP2/ref=sr_1_3?crid=1DU28I8RU6LSV&dib=eyJ2IjoiMSJ9.yoQzgAMQIuzqLdIL1qh6CV4jivFtbbL7cfkVIZXYofz9hH42YuCtu7Vxx6pI1Le8vLOKjnIUV6jGxZ0nU80O5Qyyde30XEQqt1-xBH1cEKM_nOirW_uWMxN7X1VXHWuG-spG0Lo57zJ7ki4A0JwPqRFiBNcngB1Yql3hhgrbk0o7VIc0MfIU5VyTpU1QTyHryM0IgzSBzCZ1s2aBovVJSsxezRpRRBxNKO8phdGNs0Q.SPuCis58o9wGOzpQU_l1Ow9aft97TxP60htFTnm6PMQ&dib_tag=se&keywords=usb%2Bextension%2Bcable&qid=1725633256&sprefix=usb%2Bex%2Caps%2C183&sr=8-3&th=1) to make connecting easier.*
    12
    Click "Firmware Update"
    13
    Click "No, keep current firmware"
    14
    Under Organization, Click the Firmware List Dropdown.
    15
    Select the proper Organization firmware, in this example we are selecting "TA-IGT-SVRA v0.7.2.0". To confirm you have the latest firmware, while connected to the Internet, click the "Cloud" icon designated by the red arrow before selecting the Organization firmware. HINT: If your Organization firmware is not listed, Select "Default."
    16
    Once you have successfully selected the Organization firmware of choice, Click "Start firmware update"
    17
    Click "Yes, update the firmware"
    18
    Older Firmware Versions may require Initialization. Newer versions will not see this step.
    19
    Older Firmware Versions may require Restoring after Initialization. Newer versions will not see this step.
    20
    SUCCESS! Click "Got it" to continue.