Adding Mitigation Readings and Dry Standard to Project
Chase Norton
|
16 steps
|
2 minutes
Cleanclaims
1
Navigate to your project on [https://app.cleanclaims.com/](https://app.cleanclaims.com)
Before adding Rooms and Levels you will need to complete the prerequisites of your project as defined by your project requirement settings. Project requirement settings can be edited by an Admin or Org Admin
2
Follow the Requirements list to complete the tasks before adding a Room or Level "Prerequisites to adding a room/chamber"
3
Click on your first requirement, "Image of front of structure".
4
You can use the native camera feature by clicking "Quick picture(s)" or by using the "Upload picture(s)" button.
5
When using the Camera, take the image of the building or structure by clicking the Circle. You can take multiple images at once.
6
Once completed with taking the images, Click "check"
7
Click "Outdoor Environment."
8
Click "Add reading"
9
Insert the relevant data for your outdoor reading, including Tempurature and Relative Humidity
10
Click "Quick picture(s)" or "Upload picture(s)" to take an image of your **Hygrometer** readings for documentation.
11
Once all relevant information has been entered and images uploaded, Click "Save"
12
Click "Unaffected Ambient Dry Standard"
13
Click "Add dry standard"
14
Enter the location of where you will take the Dry Standard Reading.
NOTE: This is the reading that will be used as the dry standard to auto-calculate the dryouts of the materials of the project.
15
Again, enter the relevant information including the Temperature, relative humidity and images of your hygrometer readings.
16
Click "Save"
