Agents: How to Use Quick Plant

This guide provides a step-by-step approach to using the Quick Plant feature on the AgriSompo mapping platform, enabling efficient crop planting and management. It covers everything from selecting planting dates and crop types to marking fields as prevented plant or uninsurable. By following this guide, users can streamline their planting process and ensure accurate record-keeping, ultimately enhancing productivity and reducing errors in agricultural management.

Jodi Burney
40 steps
3 minutes

Agrisompo

Navigate to [https://agrisompo-mapping.agrinet.agrisompo.com/](https://agrisompo-mapping.agrinet.agrisompo.com/)

To open Quick Plant: Select the Plant drop-down and select Quick Plant

Quick Planting Fields

Select a plant date.

Use the drop-downs to select a crop-county, practice, and type. Note: The selected combination will appear in the box at the bottom of the Quick Plant Window.

Click on the Crop-Practice-Type combination in the window. This will highlight the combination gray.

Click the field on the map to plant to the chosen crop.

The field will highlight with a red border and a window will pop up. Select a Unit to attach to the field. Use the "Filter by" at the top to filter by PLSS or FSN.

If the field is linked to only one unit, the *Select a Unit* window will not appear, and the planting will automatically be attached to that unit.

Adjust the acres if needed.

Once selections have been made, click on Select.

Click on a different field to repeat the process using the same Crop-Practice-Type.

Click Save when finished planting with the selected Crop-Practice-Type.

The Plantings are now recorded.

Repeat the entire process again by selecting a different Crop-Practice-Type.

Click on a field to report.

If there's an existing planting event, it will be listed at the top of the window. Note: Hovering over the existing event will display all reported data including the crop-county, unit, reported acres and plant date and more. The remaining acres will display and can be adjusted if needed.

Click Save after planting.

To watch an accompanying video on this process, click the link below to be taken to the video player. [**2MT - Digital Ag - Quick Plant - Part 1_042025**](https://agrisompo.vids.io/videos/4d91d4ba1315eec4c4/2mt-digital-ag-quick-plant-part-1_042025)

Prevented Plant Acres

To mark fields as Prevented Plant: check the Prevented Plant box.

Select a Crop-Practice-Type and click on a field to open the Prevented Plant Window.

Select a Unit.

Adjust the acres if needed.

Click "Select"

Click "Save"

If "Prevented Planting Crosshatch" is enabled in User Preferences, you will notice the crosshatch on the Prevented Plant field.

The Prevented Plant acres are now recorded.

To watch an accompanying video on this process, click the link below to be taken to the video player. [**2MT - Digital Ag - Quick Plant - Part 2 - Reporting Prevented Planting Acres**](https://agrisompo.vids.io/videos/1191d4ba1315e9cf98/2mt-digital-ag-quick-plant-part-2-reporting-prevented-planting-acres)

Uninsurable Acres

To report uninsurable acres: Select a Plant Date.

Click the Uninsurable checkbox.

Choose a Crop-Practice-Type and click on the field to be reported as uninsurable.

Select a Unit.

Adjust the acres if needed.

Select an Uninsurable Reason.

Click Select when finished.

Click "Save"

The acreage has been reported as uninsurable.

To watch an accompanying video on this process, click the link below to be taken to the video player. [**2MT - Digital Ag - Quick Plant - Part 3 - Reporting Uninsured Acres**](https://agrisompo.vids.io/videos/4491d4ba1315e9cecd/2mt-digital-ag-quick-plant-part-3-reporting-uninsured-acres)

Editing a Field in the Plant window

To edit a field: Click on Edit Acres to enable the function and then on a field. This will open the plant window.

Once the Plant window is open, make any needed changes and click on save.

To close the Plant window and go back to Quick Plant, click on the X in the upper right corner of the window.

Closing Quick Plant

To close Quick Plant, click on the X in the upper right corner of the window.

Training Videos

[Using Quick Plant- Part 1](https://agrisompo.vids.io/videos/4d91d4ba1315eec4c4/2mt-digital-ag-quick-plant-part-1_042025) [Using Quick Plant- Part 2 (Prevent Plant Acres)](https://agrisompo.vids.io/videos/4d91d4ba1315eec4c4/2mt-digital-ag-quick-plant-part-1_042025) [Using Quick Plant- Part 3 (Reporting Uninsurable Acres)](https://agrisompo.vids.io/videos/4491d4ba1315e9cecd/2mt-digital-ag-quick-plant-part-3-reporting-uninsured-acres) [Using Quick Plant- Part 4 (Editing Acres)](https://agrisompo.vids.io/videos/4491d4ba1315e9cecd/2mt-digital-ag-quick-plant-part-3-reporting-uninsured-acres)

Additional Resources

Want to Plant Acres through the Plant Window? Check out this Scribe: [Using the Plant Window](https://scribehow.com/viewer/Agents_Using_the_Plant_Window__kcIkHH-SSDu4cw9AaLZquQ?referrer=documents) Use the AgriSompo Mapping University to find all guides related to Mapping: [AgriSompo Mapping University](https://scribehow.com/page/AgriSompo_Mapping_University__1xLJ5hB7T7-jls3iTojeQw) AgriNet University houses all AGX and Mapping guides: [AgriNet University](https://scribehow.com/page/Agent_AgriNet_University__3qiYO2WcQDqlLMgvTO7fgw)

Agents: How to Use Quick Plant

Jodi Burney
40 steps
3 minutes

Agrisompo

Navigate to [https://agrisompo-mapping.agrinet.agrisompo.com/](https://agrisompo-mapping.agrinet.agrisompo.com/)

To open Quick Plant: Select the Plant drop-down and select Quick Plant

Quick Planting Fields

Select a plant date.

Use the drop-downs to select a crop-county, practice, and type. Note: The selected combination will appear in the box at the bottom of the Quick Plant Window.

Click on the Crop-Practice-Type combination in the window. This will highlight the combination gray.

Click the field on the map to plant to the chosen crop.

The field will highlight with a red border and a window will pop up. Select a Unit to attach to the field. Use the "Filter by" at the top to filter by PLSS or FSN.

If the field is linked to only one unit, the *Select a Unit* window will not appear, and the planting will automatically be attached to that unit.

Adjust the acres if needed.

Once selections have been made, click on Select.

Click on a different field to repeat the process using the same Crop-Practice-Type.

Click Save when finished planting with the selected Crop-Practice-Type.

The Plantings are now recorded.

Repeat the entire process again by selecting a different Crop-Practice-Type.

Click on a field to report.

Click Save after planting.

Prevented Plant Acres

To mark fields as Prevented Plant: check the Prevented Plant box.

Select a Crop-Practice-Type and click on a field to open the Prevented Plant Window.

Select a Unit.

Adjust the acres if needed.

Click "Select"

Click "Save"

If "Prevented Planting Crosshatch" is enabled in User Preferences, you will notice the crosshatch on the Prevented Plant field.

The Prevented Plant acres are now recorded.

Uninsurable Acres

To report uninsurable acres: Select a Plant Date.

Click the Uninsurable checkbox.

Choose a Crop-Practice-Type and click on the field to be reported as uninsurable.

Select a Unit.

Adjust the acres if needed.

Select an Uninsurable Reason.

Click Select when finished.

Click "Save"

The acreage has been reported as uninsurable.

Editing a Field in the Plant window

To edit a field: Click on Edit Acres to enable the function and then on a field. This will open the plant window.

Once the Plant window is open, make any needed changes and click on save.

To close the Plant window and go back to Quick Plant, click on the X in the upper right corner of the window.

Closing Quick Plant

To close Quick Plant, click on the X in the upper right corner of the window.

Training Videos

Additional Resources