Apple Device

This document provides step-by-step instructions on how to connect to the guest wireless network and obtain the required security certificate for accessing the secured network at Tulsa Community College.

12 steps
4 seconds

If you have followed the steps below and you still cannot connect, please follow the directions under step 12.

Step 1: Connect to the TCC-Wifi-Onboarding Wireless Network 1. Open the Wi‑Fi or Wireless Network settings on your device. 2. From the list of available networks, select: TCC-Wifi-Onboarding 3. Connect to the network. No password is required. 4. Confirm that you are connected before continuing.

Step 2: Obtain the Required Security Certificate 1. Once connected to the TCC-Wifi-Onboarding network, open a web browser (Edge, Chrome, Safari, etc.). 2. In the address bar, navigate to the following website: <https://cloud.securew2.com/public/03611/TCCSecure/> 3\. Here is a QR code incase needed.

When you go to the website you will see this page. Click on the Join Now Button to start the process to get a certificate to join the wireless network.

You will be shown a page like this with instructions on how to sign in and connect. The pop up should show up automatically for you to go to the next step.

Here is the pop up on the screen with the instructions. You will want to click allow to download the config profile to connect to the wireless network.

It will then download and you can click close. Next you will need to go to settings on your phone or IPad.

Go to Settings on your Apple device. There is a Profile Download section above Airplane Mode. Click on Profile Download to continue.

When you click on the profile download you should get a pop up that looks like this. This is a safe pop up. You will want to click the install button to continue the setup.

You will get this warning message. It is safe to install and will not harm your device. You will want to click Install to continue.

Click install and it should install the correct certificate. Go to the network settings and click on the TCCSecure network and you should connect.

Forget the TCC Onboarding Wireless Network on iPhone Open **Settings**. Tap **Wi-Fi**. Find **TCC Onboarding** in the list of networks. Tap the **ⓘ (Info)** button next to **TCC Onboarding**. Tap **Forget This Network**. Tap **Forget** to confirm.

If you cannot connect after completing the above steps, please follow the steps below as you might have an older configuration that is not allowing connection and try to onboard again after completing the steps: Open the **Settings** app. Tap **General**, then tap **VPN & Device Management**. Under the **Configuration Profile** section, look for the profile(s) associated with the Wi-Fi network TCCSecure or Tulsa Community College. Tap the profile, then tap **Remove Profile** (or **Delete Profile**). Enter your device passcode if prompted, and confirm the removal. *(Recommended)* Go to **Settings > Wi-Fi**, find the network, tap the **(i)** icon next to it, and tap **Forget This Network**. Restart the device or toggle Airplane Mode on and off, then run through the onboarding portal again.

Apple Device

12 steps
4 seconds