Create a Room in Clean Claims
Chase Norton
|
23 steps
|
2 minutes
Cleanclaims
1
Navigate to your project at <https://app.cleanclaims.com>
2
Select the appropriate level, and Click "Add room"
3
Click this text field.
4
Enter the Name, Select the Level/Chamber and enter notes for that room
5
Click "Continue" to move to Initial Content
6
Click "Floor and Ceiling"
7
Enter the appropriate data for the Floor and Ceiling Dimensions
8
Click "Walls and Cuts"
9
Click "Add wall"
10
If wall cut outs is not required, Click "Wall cuts not required". Otherwise go to Step 11
11
Click "Add wall"
12
Enter the Wall entries. You can duplicate once the details are entered.
13
Click "Media"
14
Use either "Quick picture(s)" or "Upload picture(s) based on the requirements and upload any images needed.
15
Click "Reading/Sensor Setup"
16
Enter the appropriate data including images of your readings.
17
Click "Moisture Content Readings"
18
Enter the Material readings and select if it's Penetrating or Non-penetrating and enter your measurement.
19
Enter the Dry standard. You can create a new one, or choose an existing one.
20
When all the requirements show a green check, and you're 100% complete with the room, Click "Finish room"
21
Click "Floor 1"
22
Click "View rooms"
23
Click "Requirements" to see any oustanding requirement for that room, and complete each task accordingly.
