Customize Site Fittings

This guide explains how to manage your shower hardware options by enabling or disabling fittings from the Site Fittings screen.

6 steps

Obe

You will require **''Site Admin''** permissions to follow the steps in this guide. If you believe you should have these permissions but you can't edit/access the **Site Fittings** screen, please contact your local OBE representative.

Click on the menu icon and select **"Site Fittings"**

Enable/Disable Specific Fittings

To make changes to a few specific hardware fittings: - Ensure the **"Structure Type"** filter is set to [[Shower]] - Use the **Search fields** in the top left to find the relevant fitting

Select the relevant fitting from the table: - To enable: Toggle the **''In Use''** button ***ON*** - To disable: Toggle the **''In Use''** button ***OFF*** Click **''Save''** after each change.

**Duplicate Fittings Tip!** When you notice duplicate fittings, use the **Fitting Name** to understand the purpose of each version. Many fittings have variants tailored to different fabrication or installation needs, such as wall-only versus ceiling/floor channels.

Enable/Disable Fittings in Bulk

To make bulk changes to fittings, edit the filters: - Select [[Shower ]]from the **"Structure Type"** filter - Select an option from the **''State''** filter (i.e. [[Usable ]]/ [[Active ]]/ [[Inactive]]) - *Select [[Usable ]]to view both inactive and active fittings.*

- Select a **"Manufacturer"** (Optional) - Select a **''Fitting Type''** (Optional)

Review the fittings in the table and use the buttons at the bottom of the screen to **enable** or **disable** all listed fittings.