How to apply radius or angled corners in the Glass Designer

This guide offers a step-by-step approach to applying radius or angled/clipped corners via the Add Cutout tab in the Glass Designer.

16 steps

Smartglazier

From the Glass Designer screen, enter your measurements and select your glass details, then click on **"Add Cutout"**.

Click **"+ Corner"** to add a new corner process

How to apply radius corners

Select **"Radius Corner''** Enter a value into the **"Radius"** field.

Tick the checkboxes to select which corners this radius corner process should be applied to. Or, tick **"Select All"**

Click **"Apply Corners"**

Click **"Continue"**, then **"Ok"** after reading the pop-up messages.

The diagram will now display the radius corners. You can click directly on a radius corner on the diagram to change the radius value of that corner.

NOTE: The glass designer does not currently support drawing arches. The closest workaround we have is to draw half-rounds by entering two radius corners on the top left and right corners.

How to apply angled corners

Click **"+ Corner"**

Click **"Angled Corner"**

Enter values in the **"Horizontal Size"** and **"Vertical Size"** fields

Tick the checkboxes to apply the angled corner to specific corners, or tick **"Select All".** Then click **"+ Apply Corner".**

You will now see the angled corners on the glass diagram.

How to remove radius / angled corners

To remove radius/angled corners, navigate to the **"Glass"** tab and click **"+ Corner"**

Select **"Remove Existing"**

Click **"Select All"** or tick the checkboxes to remove the corner process from specific corners.

Click **"- Remove Corners"**