Powering the RX Board On/Off or Putting it into Sleep Mode

This guide offers essential instructions for efficiently managing your device's power settings, including how to power it on or off or place it into "Sleep Mode"

Julie Rains
4 steps
8 seconds

Google Sites

Smarttechnologies

Smarttech

Power Button

The Power Button is located on the left side of your RX board

When the Power Button is amber, that means your board is asleep. Tap it once (quickly) to wake it back up.

If none of the buttons are lit up on your RX board, it is likely because it has been manually switched off, or it is unplugged. (See On/Off Switch note at the bottom of this guide).

Once powered off, press the Power Button on the left side to turn it back on

The "Sleep Button" is no longer a "thing" with the RX boards. To put your IFP to sleep, you just quickly tap the Power Button.

You can also press the Power Button to manually "Power off" or "Restart." To get these options, press and hold the Power Button for a few seconds. You will see the following prompt appear on your board and can select accordingly.

On/Off Switch AKA "The Rocker Switch"

The Power Button is different from the On/Off Switch located in the back, underside of the RX board. That switch will permanently turn off the board and will need to be manually switched back on to make the board functional.