Updating FT200/FT-RD Firmware with Flagtronics Device Manager Software

This guide outlines a straightforward process for updating the firmware on FT200 and FT-RD devices using the Flagtronics Device Manager software. It ensures users can easily install the latest firmware to access current features, improvements, and required updates. Firmware installation has been simplified and no longer requires selecting a racing series or organization. Users can keep their devices up to date quickly and consistently using the same firmware across all supported events.

21 steps
5 minutes

Flagtronics

Go to [www.flagtronics.com](http://www.flagtronics.com) on your Windows based PC or Laptop. If the **Flagtronics Device Manager** software is already installed, skip ahead to **Step 10**.

Click "**Downloads**"

Click "**Flagtronics Device Manager**" to begin the download.

Click "**Downloads Icon**" or similar icon if not using Chrome Browser.

Click "**Open**" icon to install software

If presented with Microsoft Defender screen, click "More Info". If not, skip to Step 8.

Click "Run anyway"

Click "**Install**"

Once completed, Click "**Finish**" to launch **Flagtronics Device Manager** software

When the software opens, **if your computer is connected to the internet**, it will automatically download the **latest firmware** from the cloud. Once the firmware is downloaded, your computer does not need to remain connected to the internet to update your in-car device via USB.

Connect your Flagtronics In-Car Device to your computer via the [USB Plug at the end of the wiring harness](https://flagtronics.com/cdn/shop/products/DSC_0017_2048x.jpg?v=1627660139). You will see a confirmation screen showing your Devices Serial Number. In this example, it's 20001429. Click "Got It". **NOTE**: *Depending on the location of the harness, you may want to invest in an [USB Extension Cable](https://www.amazon.com/Extension-ITANDA-Transfer-Keyboard-Playstation/dp/B08FJ88BP2/ref=sr_1_3?crid=1DU28I8RU6LSV&dib=eyJ2IjoiMSJ9.yoQzgAMQIuzqLdIL1qh6CV4jivFtbbL7cfkVIZXYofz9hH42YuCtu7Vxx6pI1Le8vLOKjnIUV6jGxZ0nU80O5Qyyde30XEQqt1-xBH1cEKM_nOirW_uWMxN7X1VXHWuG-spG0Lo57zJ7ki4A0JwPqRFiBNcngB1Yql3hhgrbk0o7VIc0MfIU5VyTpU1QTyHryM0IgzSBzCZ1s2aBovVJSsxezRpRRBxNKO8phdGNs0Q.SPuCis58o9wGOzpQU_l1Ow9aft97TxP60htFTnm6PMQ&dib_tag=se&keywords=usb%2Bextension%2Bcable&qid=1725633256&sprefix=usb%2Bex%2Caps%2C183&sr=8-3&th=1) to make connecting easier.*

Click "Firmware Update"

If asked, Choose "No, keep current firmware"

Under **Organization**, Click the **Firmware List Dropdown**.\ \ Starting with firmware version **0.9.0.0** and all future releases, users no longer need to select firmware based on their racing organization. All users should select the **Default** firmware. Organization-specific firmware options have been retained only to allow users to revert to a previous version if needed. If version **0.9.0.0** or later does not appear in the firmware list, ensure your computer is connected to the internet and click the Cloud icon (indicated by the red arrow) to download the latest firmware.

Once you have successfully selected the Organization firmware of choice, Click "Start firmware update"

Click "Yes, update the firmware"

Older Firmware Versions may require Initialization. Newer versions will not see this step.

Older Firmware Versions may require Restoring after Initialization. Newer versions will not see this step.

SUCCESS! Click "Got it" to continue.

Click "Device Information" to see an overview of your In-Car Device.

You have finished the Firmware Update process. You may now close the Software by clicking the Red X.