ZoneIQ Walkthrough
- View your workforce visually, with filters - Check hardware status
Support Kwant
11 steps
2 minutes
Kwant
Project Navigation
1
Select 'ZoneIQ' from sidebar menu.
Plan Visualization
2
Toggle 'Zone Boundary' or 'Heatmap' views to customize plan display.
Filter Workers and Companies
3
Set the date range by clicking the date dropdown to filter by available options. By default, it is set to "Now" which shows locations in the last 5 minutes.
Tip! Workers and companies can be viewed by 1. Selecting them from the "Workers on Floor" / "Companies on Floor" dropdowns to highlight them on the floor plan, or 2. Filtering them through the filter menu to see only workers associated with specific parameters.
4
From the "Workers on Floor" dropdown, select specific workers to highlight their positions on the plan.
5
From the "Companies on Floor" dropdown, select companies to highlight their associated workers on the plan.
6
To adjust who is shown on the plan, click the Filter icon, input desired parameters, and click Filter to apply.
7
The quantities of workers and companies on dropdown menus, and the heatmap will update accordingly, Click 'Clear All' to reset filters.
View Hardware
8
Expand 'Sensors on Floor' to view device locations and status.
9
Select specific sensors to locate them on the floor plan. Icons of selected sensors turn blue.
Alert! Offline sensors will be shown in red. To bring them online, hold the Kwant magnet wand in front of the sensor for 10 seconds. Contact your Kwant representative if the sensor does not come offline in the next hour.
10
Expand 'Zones' and select a zone to highlight boundaries and view properties.
11
Expand 'Gateways' to view gateway hardware locations. Depending on the project set up, gateways may not be shown on this plan view.
ZoneIQ Walkthrough
- View your workforce visually, with filters - Check hardware status
Support Kwant
11 steps
2 minutes
Kwant
Project Navigation
1
Select 'ZoneIQ' from sidebar menu.
Plan Visualization
2
Toggle 'Zone Boundary' or 'Heatmap' views to customize plan display.
Filter Workers and Companies
3
Set the date range by clicking the date dropdown to filter by available options. By default, it is set to "Now" which shows locations in the last 5 minutes.
Tip! Workers and companies can be viewed by 1. Selecting them from the "Workers on Floor" / "Companies on Floor" dropdowns to highlight them on the floor plan, or 2. Filtering them through the filter menu to see only workers associated with specific parameters.
4
From the "Workers on Floor" dropdown, select specific workers to highlight their positions on the plan.
5
From the "Companies on Floor" dropdown, select companies to highlight their associated workers on the plan.
6
To adjust who is shown on the plan, click the Filter icon, input desired parameters, and click Filter to apply.
7
The quantities of workers and companies on dropdown menus, and the heatmap will update accordingly, Click 'Clear All' to reset filters.
View Hardware
8
Expand 'Sensors on Floor' to view device locations and status.
9
Select specific sensors to locate them on the floor plan. Icons of selected sensors turn blue.
Alert! Offline sensors will be shown in red. To bring them online, hold the Kwant magnet wand in front of the sensor for 10 seconds. Contact your Kwant representative if the sensor does not come offline in the next hour.
10
Expand 'Zones' and select a zone to highlight boundaries and view properties.
11
Expand 'Gateways' to view gateway hardware locations. Depending on the project set up, gateways may not be shown on this plan view.
